skip to Main Content

55″ Smart Displays

Rated 0 out of 5
(be the first to review)

Panel

Mainboard Model
17MB120DSR3-DSOPT2
H-Freq
67.5 khz
Max. Pixel Freq.
74.25 MHz
V-Freq
60 Hz
Size
55″
Backlight Type
EDGE TYPE LED
Panel Technology
IPS
Panel Type
16/7 Panel
Front Type
Ultra Narrow Bazel
Orientation
Horizontal
Resolution
1920 x 1080 (16:9) – FHD
Active Area
1210 mm (H) X 681 mm (V)

Description

Panel

Mainboard Model
17MB120DSR3-DSOPT2
H-Freq
67.5 khz
Max. Pixel Freq.
74.25 MHz
V-Freq
60 Hz
Size
55"
Backlight Type
EDGE TYPE LED
Panel Technology
IPS
Panel Type
16/7 Panel
Front Type
Ultra Narrow Bazel
Orientation
Horizontal
Resolution
1920 x 1080 (16:9) - FHD
Active Area
1210 mm (H) X 681 mm (V)
Brightness (Cd/m2)
400
Contrast Ratio
1200
Dynamic Constrast Ratio
1M:1
Panel Life Time ( Typ. )
30000 / 50000 Hr
Viewing Angle
178°
Response Time
6 ms
Color Value
8 Bit, 16.7 M Colors
Areas of Usage
Indoor

Monitor Connectivity

RGB Input
Dsub 15 PIN VGA CON., YPbPr
RGB Output
N/A
Video Input
2xHDMI2.0, DP1.2a, DVI, 1xUSB3.0, 1xUSB2.0
Video Output
DP1.2a
Audio Input
LINE IN JACK
Audio Output
LINE OUT JACK
External Control
RS232(DSUB 9P), RJ12, Ethernet
External Sensor
N/A

Mechanical

Size
1239 mm(L) x 716 mm(H) x 67 mm(D)
Weight (kg)
17.25 KG
Vesa Mounting Sizet
400 mm(H)x 400 mm(V)
Bezel Width
18mm / 11 mm

Working Conditions

Temperature Conditions
+40°C / 0°C
Humidity
90%

Features

Main Features
Open Content Management Support, Scheduler, USB-Autoplay, Auto-Launch, HDMI-CEC, HDMI-Hotplug, Auto-switch on Failover, Panel Lock
Mechanical Features
Mechanical Buttons, IR Extender Support
Speaker
2 x 10 W

Power

Power Supply
110 VAC – 240 VAC
Power Consumption ( Deep Standby )
≤0.5W
Power Consumption ( On Full Load )
107W

Accessory

Standard
QSG, Warranty Card, IB, Power Cord, Remote Control, RC Battery, Mounting Kit

Certification

Safety
EMC
CB
S-MARK
CE
Reability Approval

* Specifications are subject to change without prior notice.

Downloads

Features

SoC Content Management

With quad core SoC (System on Chip), this Series displays are the digital signage monitors for both offline designed content and cloud-based managed content. This helps your digital content to be displayed in the displays by content management systems.

Subtle Design

This series’ displays exhibit ultra narrow bezel design eliminating the visual superfluities, directing audience focus on your advertised content. This series is desirable for its thinnest depth among our digital signage displays.

Built-in Connectivity

This series features wired and wireless connectivity such as embedded WiFi and Bluetooth. Due to the wireless capabilities, the displays can easily gather its content without any external device. Moreover, WiFi allows screen sharing to be enjoyed with Miracast.

Daisy Chain

The display can mirror the content (to another display) into its display port out coming from its display port in. This set up creates a daisy chain like structure allowing for monitors to be set up as Video Wall mode.

Open Platform Support

Our SoC supports API (Application Programming Interface) for solution providers/integrators to develop and integrate any HTML5-based to be installed and used on our displays.

Display Control

Digital Signage Display SoC enables the users to control our displays using RS232 commands in a Local Area Network. Together with the full RS232 command list you can change/set volume, turn on/off the monitor, set a schedule for content display, set a webpage link to be displayed and give a wide range of commands in real-time.

External Device Connections

You may want to connect your teleconference system, screen sharing system, set-top box or external PCs via HDMI port. For this purposes, our monitors help you to maximize user experience with HDMI CEC (Consumer Electronics Control) and HDMI Hotplug capabilities.

Scheduler

Digital Signage Monitor Software allows many important features such as Scheduler. Scheduler sets your display turn on/off time easily and lets you not to worry about the status of your displays in any time.

Signal Failover

Our SoC Software has a protection for “No Signal” scenario. If the USB is unplugged after your content is set to be displayed with USB, the display will either show your customized banner or search for any other signal from other sources (HDMI, Display Port, etc.). This failover protection is constructed for higher user experience.

Operation Time Support

Professional Panels used with this series are quality confirmed to operate 16 hours a day without any issues. Upon this, the series come with 400 Nits brightness levels suitable for medial indoor environment.

Pixel Shifting

Pixel Shifting is designed to be activated inside the SoC in order to prevent for potential risk of image sticking, caused by constant content. With this feature turned on, pixels on the screen will move in an interval while causing no interference of visual experience.

Usb Auto-Play

You will be able to show photo and video content automatically with USB Auto-play feature. SoC software gives you a choice to turn on USB auto-play function making it easy for end-users to show any media on the screen and not worry about anything else.

Source Switching

It is made available to set any Source on startup of the display. It can also be switched on any other signal source using scheduler and failover scenarios. This lets the users to freely control the process of their requirements allowing best user experience.

Auto Launch

We have made it easy to give any HTML5-based application link to the display within the SoC software. Upon this, the display will start with the given link. The application can either be an offline or an online application, allowing the customers to execute their own application.

Reviews

There are no reviews yet.

Be the first to review “55″ Smart Displays”

Your email address will not be published. Required fields are marked *